custom-insert-service

Milwaukee Packout 3 Drawer Tool Box Socket Organiser Insert A custom two-piece insert liner for the Milwaukee Packout 3 Drawer Tool Box, designed to organise a large combined 1/2" drive SAE and Metric socket set in a single drawer. Every socket has its own dedicated slot with clear size markings — see at a glance exactly what's there and what's missing. Modular design means the insert can be printed in two halves on a standard printer bed — both halves assemble to create the complete organiser. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ SOCKET SLOTS INCLUDED: SAE Standard: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1" Metric Standard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24mm SAE Deep: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1" Metric Deep: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24mm Extension slots included ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE SOCKET SETS: Milwaukee SHOCKWAVE 1/2" Drive Metric Deep Socket Set (29pc) 🇺🇸 US Part No: 49-66-7015 🇬🇧 UK / 🇪🇺 EU: No confirmed equivalent set number — Milwaukee UK/EU sell equivalent individual SHOCKWAVE 1/2" sockets separately. Milwaukee SHOCKWAVE 1/2" Drive SAE Deep Socket Set (19pc) 🇺🇸 US Part No: 49-66-7012 🇬🇧 UK / 🇪🇺 EU: SAE (imperial) sizing is primarily a US/Canadian standard — no equivalent set sold in metric markets. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE PACKOUT UNIT: Milwaukee Packout 3 Drawer Tool Box 🇬🇧 UK Part No: 4932472130 🇺🇸 US Part No: 48-22-8443 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH: Printed in PETG for strength and durability — built to handle the demands of a working toolbox. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE: Insert liner only — Milwaukee Packout 3 Drawer Tool Box and sockets are not included. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Various colours available.

Milwaukee Packout Insert Liner for M12 FUEL Impact Wrench & Ratchet A custom insert liner for the Milwaukee Packout Compact Organiser, designed to hold the M12 FUEL Sub Compact Impact Wrench alongside an M12 Ratchet and batteries — all neatly organised in one place. Holds 4 M12 CP compact batteries (2 in the insert, 2 fitted to the tools) plus 1 XC battery. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE IMPACT WRENCHES (choose one): M12 FUEL 1/2" Sub Compact Impact Wrench 🇬🇧 UK / 🇪🇺 EU Model: M12FIWF12 🇺🇸 US Model: 2563-20 M12 FUEL 3/8" Sub Compact Impact Wrench 🇬🇧 UK / 🇪🇺 EU Model: M12FIWF38 🇺🇸 US Model: 2562-20 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE RATCHETS (choose one): M12 3/8" Ratchet 🇬🇧 UK / 🇪🇺 EU Model: M12BIR38 🇺🇸 US Model: 2457-20 M12 FUEL 3/8" Ratchet 🇬🇧 UK / 🇪🇺 EU Model: M12FIR38 🇺🇸 US Model: 2557-20 M12 FUEL 3/8" High Speed Ratchet 🇬🇧 UK / 🇪🇺 EU Model: M12FHIR38 🇬🇧 UK / 🇪🇺 EU Article No: 4933478172 🇺🇸 US Model: 2567-20 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE PACKOUT CASE: Milwaukee Packout Compact Organiser 🇬🇧 UK Part No: 4932464083 🇺🇸 US Part No: 48-22-8435 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH: Printed in PETG for strength and durability — built to handle the demands of a working toolbox. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE: Insert liner only — Milwaukee Packout case, tools, and batteries are not included. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black or red — select your colour at checkout.

Milwaukee Packout Insert Liner for M18 FUEL Mid-Torque Impact Wrench A custom insert liner for the Milwaukee Packout Compact Organiser, designed specifically for the M18 FUEL 1/2" Mid-Torque Impact Wrench with a 5.0Ah battery attached. Includes 9 dedicated socket slots for the Milwaukee SHOCKWAVE 1/2" Drive Metric Deep Socket Set — everything organised and ready to grab in one place. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE TOOL: Milwaukee M18 FUEL 1/2" Mid-Torque Impact Wrench 🇬🇧 UK / 🇪🇺 EU Model: M18FMTIW2F12 🇬🇧 UK / 🇪🇺 EU Article No: 4933478449 🇺🇸 US Model: 2962-20 (same tool, sold under a different model number) Note: this insert is designed to hold the wrench with a 5.0Ah battery fitted. Fit may vary with other battery sizes. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE SOCKET SET (9 slots): Milwaukee SHOCKWAVE Impact Duty 1/2" Drive Metric Deep Socket Set (9pc) Sizes: 10, 12, 13, 14, 15, 17, 19mm (plus 2 additional slots) 🇺🇸 US Part No: 49-66-7032 🇬🇧 UK / 🇪🇺 EU: No confirmed equivalent set part number — Milwaukee UK/EU sell equivalent individual SHOCKWAVE 1/2" deep sockets separately. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE PACKOUT CASE: Milwaukee Packout Compact Organiser 🇬🇧 UK Part No: 4932464083 🇺🇸 US Part No: 48-22-8435 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH: Printed in PETG for strength and durability — built to handle the demands of a working toolbox. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE: Insert liner only — Milwaukee Packout case, tool, battery, and sockets are not included. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black or red — select your colour at checkout.

Milwaukee Packout Insert Liner for M12 Impact Wrench & 43pc 3/8" Socket Set A custom two-piece insert liner for the Milwaukee Packout Compact Organiser, designed to hold your M12 FUEL Sub Compact Impact Wrench alongside the full 43-piece 3/8" Drive SHOCKWAVE SAE & Metric Impact Socket Set, plus a dedicated bay for one M12 CP or XC battery. Every socket has its own labelled slot so you can see at a glance exactly what's there and what's missing. The two pieces fit together seamlessly inside the case for a clean, solid install. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE IMPACT WRENCHES: M12 FUEL 3/8" Sub Compact Impact Wrench 🇬🇧 UK / 🇪🇺 EU Model: M12FIWF38 🇺🇸 US Model: 2554-20 (same tool, sold under a different model number) M12 FUEL 1/2" Sub Compact Impact Wrench 🇬🇧 UK / 🇪🇺 EU Model: M12FIWF12 🇺🇸 US Model: 2555-20 (same tool, sold under a different model number) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE SOCKET SET: Milwaukee SHOCKWAVE Impact Duty 3/8" Drive SAE & Metric Deep Socket Set 🇺🇸 US Part No: 49-66-7009 🇬🇧 UK / 🇪🇺 EU / 🇦🇺 AU: No confirmed equivalent set part number — Milwaukee UK/EU sell individual SHOCKWAVE 3/8" sockets. This insert is sized for the 43-piece 49-66-7009 set. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE PACKOUT CASE: Milwaukee Packout Compact Organiser 🇬🇧 UK Part No: 4932464083 🇺🇸 US Part No: 48-22-8435 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH: Printed in PETG for strength and durability — built to handle the demands of a working toolbox. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE: Insert liner only — Milwaukee Packout case, sockets, and impact wrench are not included. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black or red — select your colour at checkout.

Milwaukee Packout Insert Liner for M12 FUEL 1/2" Stubby Impact Wrench & Socket Set A custom insert liner for the Milwaukee Packout Compact Tool Box, designed to hold the M12 FUEL 1/2" Sub Compact Stubby Impact Wrench alongside a full metric socket set and extension set. Every socket has its own labelled slot — easy to identify at a glance even in low light. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED: - M12 FUEL 1/2" Stubby Impact Wrench bay - M12 CP 2.0 battery slot - Labelled socket slots: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 26, 27mm (15 sockets) - 3x extension slots (1/2" drive) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE TOOL: Milwaukee M12 FUEL 1/2" Sub Compact Stubby Impact Wrench 🇬🇧 UK / 🇪🇺 EU Model: M12FIWF12 🇺🇸 US Model: 2563-20 (same tool, sold under a different model number) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE SOCKET SET: Milwaukee SHOCKWAVE Impact Duty 1/2" Drive Metric Deep Socket Set (14pc) Sizes: 10–27mm (20mm purchased separately) 🇺🇸 US Part No: 49-66-7014 🇬🇧 UK / 🇪🇺 EU: No confirmed equivalent set — Milwaukee UK/EU sell equivalent individual SHOCKWAVE 1/2" sockets separately. Extensions: 3-piece 1/2" drive impact extension set Note: designed around Harbor Freight #67972 — US only brand. 🇬🇧 UK / 🇪🇺 EU / 🇦🇺 AU buyers with a 3-piece 1/2" drive extension set of similar dimensions should verify fit against listing images. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE PACKOUT CASE: Milwaukee Packout Compact Organiser 🇬🇧 UK Part No: 4932464083 🇺🇸 US Part No: 48-22-8435 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH: Printed in PETG for strength and durability — built to handle the demands of a working toolbox. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE: Insert liner only — Milwaukee Packout case, tool, battery, sockets, and extensions are not included. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Various colours available.

Milwaukee Packout Insert Liner for Brother P-Touch E550W Label Printer A custom insert liner for the Milwaukee Packout Compact Organiser, designed to hold your Brother P-Touch E550W label printer securely in place — keeping everything you need organised and protected on site. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED: - Dedicated bay for the Brother P-Touch E550W printer body - Storage for up to 4+ tape cassettes (2 above the printer, 2+ to the side) - Slot for mains charging adapter - Dual pen holders for Sharpie or Milwaukee Inkzall markers - Small open bin for accessories such as heat shrink, spare labels, or bits ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY: Brother P-Touch E550W Label Printer (globally available under the same model name) Milwaukee Packout Compact Organiser 🇬🇧 UK Part No: 4932464083 🇺🇸 US Part No: 48-22-8435 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH: Printed in PETG for strength and durability — rigid, tight-fitting, and built to last. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE: Insert liner only — Milwaukee Packout case and Brother printer are not included. Printer, tapes, and accessories shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Various colours available.

Milwaukee Packout Insert Liner for 43pc 3/8" Impact Socket Set A custom two-piece insert liner for the Milwaukee Packout Organiser, designed specifically for the 43-piece 3/8" Drive SHOCKWAVE SAE & Metric Impact Socket Set. Every socket has its own labelled slot with white size markers for easy identification even in low light — see at a glance exactly what's there and what's missing. Also includes a dedicated slot for the 3/8" adapter. The two pieces fit together seamlessly inside the case for a clean, solid install. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ SOCKET SLOTS INCLUDED: Metric: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm SAE: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4" Plus: 3/8" adapter slot ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE SOCKET SET: Milwaukee SHOCKWAVE Impact Duty 3/8" Drive SAE & Metric Deep Socket Set 🇺🇸 US Part No: 49-66-7009 🇬🇧 UK / 🇪🇺 EU / 🇦🇺 AU: No confirmed equivalent set part number — Milwaukee UK/EU sell equivalent individual SHOCKWAVE 3/8" sockets. This insert is sized for the 43-piece 49-66-7009 set. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBLE PACKOUT CASE: Milwaukee Packout Organiser (larger flat organiser) 🇬🇧 UK Part No: 4932464082 🇺🇸 US Part No: 48-22-8436 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH: Printed in PETG for strength and durability — built to handle the demands of a working toolbox. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE: Insert liner only — Milwaukee Packout case and sockets are not included. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black or red — select your colour at checkout.

119MM 6-POINT FUEL FILTER SOCKET TOOL FOR GM DIESEL ENGINES A 119mm 6-point fuel filter socket tool designed to remove and refit the General Motors diesel fuel filter housing found across a wide range of Vauxhall, Fiat, Alfa Romeo and Lancia models. Sized specifically for the 119mm filter canister, it engages all six points for a secure grip, giving you the leverage needed to break a seized filter loose without slipping or rounding the housing. Designed for home mechanics and trade technicians working on GM-platform diesel engines — a tool that is otherwise difficult to source for this specific filter size. Please message after ordering to indicate if you require 1/2 or 3/8 drive. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - 119mm diameter, 6-point socket profile - Square drive insert accepts 1/2 inch or 3/8 inch drive ratchet or breaker bar - 6-point engagement distributes torque evenly around the filter canister - Designed for the GM diesel fuel filter housing (filter ref: 13179060) - One-piece construction — no separate parts to lose ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Compatible with GM-platform 1.3, 1.9 and 2.4 diesel engines fitted to the following vehicles: Vauxhall - Vectra C (1.3, 1.9, 2.4 diesel) - Signum (1.3, 1.9, 2.4 diesel) - Astra H (1.3, 1.9, 2.4 diesel) - Corsa C (1.3, 1.9, 2.4 diesel) - Combo (1.3, 1.9, 2.4 diesel) - Meriva (1.3, 1.9, 2.4 diesel) Fiat, Alfa Romeo and Lancia - Compatible models fitted with the same 1.3, 1.9 and 2.4 GM diesel engine family - Specific model list not exhaustive — check that your vehicle uses the 119mm GM fuel filter housing before ordering ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. PETG is a tough, impact-resistant material that handles the knocks of regular workshop use and resists oils and greases encountered during filter changes. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Socket tool only — ratchet, breaker bar and screwdriver handle are not included. Items shown in use for illustration purposes only. This tool is designed for hand-tool torque. Do not use with an impact driver or air gun. Always confirm your vehicle's fuel filter housing diameter matches 119mm before ordering. Fiat, Alfa Romeo and Lancia model coverage is based on shared GM engine platform fitment — verify compatibility against your filter housing if in doubt. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

PAINTBALL POD LOADING FUNNEL A compact loading funnel designed to fit standard paintball pods with a 60.50 mm inner diameter. Speeds up reloading by guiding paintballs cleanly into the pod without spillage, keeping you moving on the field. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED / FEATURES - Wide 100 mm outer diameter mouth for easy scooping and directing of paintballs - 60.50 mm inner diameter throat sized to seat on standard paintball pods - Compact funnel profile for quick one-handed use during reloading ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x paintball pod loading funnel ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit paintball pods with an inner diameter of 60.50 mm and an outer diameter of 100 mm. Check your pod's opening diameter before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. Tough and impact-resistant with a smooth finish that handles regular field use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Funnel only — paintball pods, paintballs and any other items shown for illustration purposes only are not included. Fits pods with a 60.50 mm inner diameter. Buyers should confirm their pod's opening measurement against the dimensions stated before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

100-BALL PAINTBALL POD WITH SNAP LID A 100-ball capacity paintball pod with a snap-action lid, designed to fit standard paintball pod holders. Printed in the UK from PETG for a tough, reliable build that handles the knocks of active field use and regular reloading. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED / FEATURES - 100-ball capacity pod body - Snap-action lid for fast, reliable access during play - Lid tethered to pod body via zip tie — stays attached and ready - Fits standard paintball pod holders ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - Pod body (100-ball capacity) - Snap lid (tethered to pod body via zip tie) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit standard paintball pod holders. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. Tough and impact-resistant, built to handle the demands of field use and regular reloading. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Pod and snap lid included. Paintballs not included. Items shown for illustration purposes only. The lid is tethered to the pod body with a zip tie as shown in the photos. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

1000-BALL PAINTBALL HAULER JUG FOR 0.68 CALIBRE PAINTBALLS A purpose-built jug designed for storing and pouring 0.68 calibre paintballs. The Paintball Hauler 1000 holds up to 1000 paintballs and is shaped to make filling loaders and other containers quick and spillage-free. Built with an ergonomic carry handle for comfortable transport and a specially shaped spout that channels balls into loaders or hoppers with control and precision. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x Paintball Hauler 1000 jug ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Holds up to 1000 x 0.68 calibre paintballs - Ergonomic carry handle for easy transport on and off the field - Shaped pouring spout for controlled, spill-free filling of loaders and hoppers - External capacity markings at 200-ball intervals (200, 400, 600, 800, 1000) on the outer wall, so you can check remaining ammo at a glance without opening the jug ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed for 0.68 calibre paintballs — the standard calibre used in the vast majority of recreational and competitive paintball markers. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. PETG is a tough, impact-resistant material that handles knocks and temperature swings well — well suited to field use and kit bag storage. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Jug only — paintballs not included. Paintballs shown in product photos are for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

SPRAY GUN STORAGE BRACKET — WALL OR WORKBENCH MOUNT A purpose-made bracket that holds your spray gun securely when not in use, keeping it within easy reach at the workbench or on the workshop wall. Mounting holes are built into the bracket so it can be screwed directly to a wall, shelf or workbench surface. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Wall or workbench mountable - Integrated mounting holes for screw fixing - Holds spray gun securely when not in use - Compact bracket design suitable for HVLP and gravity-feed spray guns ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY This is a general-purpose spray gun holder. It is designed to suit HVLP and gravity-feed spray guns commonly used in workshops and spray booths. Buyers should check their spray gun dimensions against the photos before ordering to confirm fit. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x spray gun holder ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG — a tough, impact-resistant material that handles workshop knocks and temperature swings well. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Holder only — spray gun and mounting fixings not included. Items shown for illustration purposes only. This is a general-purpose holder. Buyers should confirm their spray gun dimensions are suitable by checking the photos before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

OVERSIZED BOTTLE CUP HOLDER INSERT FOR HONDA CR-V 2017–2022 CENTRE CONSOLE This insert fits into the centre console cup holder well of the Honda CR-V (2017–2022) and expands the opening to accommodate oversized water bottles that are too wide for the standard recess. A simple press-in addition that makes the console more practical for everyday use. Designed for drivers who carry large-format water bottles and find the factory cup holder too narrow to hold them securely. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x cup holder insert ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Oversized opening to accept wide-bodied water bottles - Octagonal profile with external locating tabs to sit securely in the CR-V console well - Press-fit installation — no tools, adhesive or modification required ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Honda CR-V (2017–2022) — centre console cup holder well Please verify your CR-V's console well dimensions against the photos before ordering if you are unsure of your build year. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG. Tough and impact-resistant, handling everyday use and temperature swings in the vehicle cabin without issue. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only — no other items included. Items shown for illustration purposes only. This insert is designed to fit the 2017–2022 Honda CR-V centre console. Fit on other CR-V generations or trim variants with a different console layout is not confirmed — please check the photos against your own console before purchasing. No internal bottle diameter or height dimension is stated by the designer. Buyers with an unusually tall or wide bottle should verify against the photos prior to ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

OM642 DIESEL FUEL FILTER ACCESS TOOL A dedicated removal tool designed to fit the fuel filter housing on Mercedes-Benz vehicles equipped with the OM642 diesel engine, where the fuel filter is located on the underside of the vehicle. Confirmed compatible with the C220 (2019) and expected to suit most other OM642-equipped models sharing the same underside filter location. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Cup-style socket tool with square drive recess on the base - Fits a standard 32mm socket wrench drive - Designed for fuel filter removal on OM642 engine variants where the filter sits on the vehicle underside ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed for Mercedes-Benz vehicles fitted with the OM642 engine (fuel filter located on the underside of the vehicle), including the C220 (2019). Compatibility with additional OM642-equipped C-Class and E-Class model years is expected but not fully confirmed — please check the photos and verify against your specific vehicle before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1x fuel filter removal tool ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. Tough and impact-resistant, with a matte finish that handles knocks and typical workshop conditions. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Tool only — socket wrench not included. Items shown for illustration purposes only. Compatibility is confirmed for the OM642 engine where the fuel filter is on the vehicle underside. Exact coverage across all OM642 model years and chassis codes has not been fully verified — please compare with your vehicle and the photos before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

TWO-CUP ORGANISER INSERT FOR CITROËN C4 CACTUS MK1 The standard C4 Cactus cup holder leaves little room for the drinks most drivers actually carry. This upgrade slots straight into the existing recess and expands it to hold two cups at once, with a centre slit for keeping a car parking ticket to hand. The aperture is larger than the original, accepting standard coffee shop cups as well as carbonated and energy drink cans — the kinds of drinks the factory holder was never sized for. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Two cup positions replacing the standard single holder - Centre slit for storing a car parking ticket - Increased aperture to accept standard coffee shop cups and drink cans - Press-fit design sits snugly into the existing cup holder recess with no rocking or movement ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x double cup holder upgrade insert ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Citroën C4 Cactus Mk1 (2014-2017) Please check the photos carefully to confirm fitment with your vehicle before ordering. This insert was designed for the Mk1 C4 Cactus 2014-2017 editions and may not fit other model years or variants. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG — a tough, impact-resistant material that handles the temperature swings and everyday knocks of a car interior. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only — no other parts included. Items shown for illustration purposes only. Compatibility is confirmed for the Citroën C4 Cactus Mk1 2014-2017 editions only. Please verify against the photos before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

DRINKS HOLDER ORGANISER FOR RENAULT MEGANE CENTRE CONSOLE A custom insert designed to sit in front of the gear stick, making the Megane's built-in cup holder recess genuinely usable. Holds bottles, cans and travel mugs securely and routes a phone charger cable cleanly through the tray. WHAT'S ORGANISED - 2 x cup holder wells for bottles, cans or travel mugs - Rear clearance space to avoid obstructing USB or SD card ports (model-dependent — check your car's layout before ordering) - Cable pass-through hole to route a phone charger cable from the tray COMPATIBILITY Designed to fit: Renault Megane (generation to be confirmed — see Please Note below) MATERIAL & FINISH 3D printed in the UK from PETG. Matt textured finish. Tough and impact-resistant, handles the knocks and temperature swings of everyday in-car use. PLEASE NOTE Insert only — no drinks, cables or accessories included. Items shown for illustration purposes only. This insert is designed to fit the Renault Megane. The exact generation and year range it suits has not yet been confirmed by the seller — please check the product photos against your own car's centre console before ordering. USB and SD card clearance at the rear is also model-dependent and may vary between Megane variants. If you are unsure whether this insert suits your specific Megane, please message before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

SUN VISOR REPLACEMENT CLIP FOR FIAT GROUP VEHICLES This is a replacement sun visor retaining clip for a range of Fiat group vehicles. The original clip is a common failure point and this part is designed to match the profile of the broken or missing original, restoring the sun visor to its correct position. Suitable for drivers who have lost or broken the original plastic clip and want a straightforward replacement without sourcing an expensive OEM spare. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Replacement clip designed to match OEM profile - Matches OEM-equivalent references 713812631 and 735362747 - Press-fit installation to the original sun visor mounting point ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x sun visor replacement clip ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Confirmed fitment: - Lancia Y (2007) - Fiat Fiorino (2012) Designed to match OEM-equivalent part numbers 713812631 and 735362747, which are listed across multiple aftermarket suppliers as compatible with Fiat 500, Bravo, Doblo, Fiorino, Marea, Palio and Punto. If your vehicle uses either of these OEM reference numbers, this clip is designed to the same profile. Please check the photos against your original clip before ordering to confirm fitment. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG — a tough, impact-resistant material that handles temperature swings and everyday knocks well. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE This listing is for the replacement clip only — no other parts are included. Items shown for illustration purposes only. While this clip is designed to the profile of OEM references 713812631 and 735362747, fitment across all Fiat group models and years has not been individually verified. Please compare the photos carefully with your original clip before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

PSA GRADED SLAB DISPLAY STAND — HOLDS 15 SLABS PER UNIT A purpose-built display stand for PSA graded card slabs, designed to seat 15 slabs per unit with sleeves fitted. Multiple units connect side-by-side or back-to-back, so your collection can grow without switching display systems. WHAT'S ORGANISED - 15 x PSA graded card slabs (sleeves on) - Rows expand by connecting additional units side-by-side - Columns expand by connecting additional units back-to-back ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit PSA graded card slabs with sleeves fitted. Capacity is rated for 15 slabs per stand. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG — a tough, impact-resistant material that handles knocks and temperature swings without warping. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Display stand only — graded card slabs and sleeves not included. Items shown for illustration purposes only. This stand is designed for PSA graded slabs with sleeves. Fit for other grading authority slabs (BGS, CGC, etc.) is not confirmed — please check dimensions against your slabs before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

PSA GRADED SLAB DISPLAY STAND FOR POKÉMON & TRADING CARDS This modular 2x2 display stand is designed specifically for PSA modern graded slabs, giving collectors a clean and stable way to showcase four graded cards at once. Built in a press-fit modular format, it assembles without tools and sits neatly on a desk, shelf or display cabinet. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - 4 x PSA modern graded slab positions (2 columns x 2 rows) - Modular press-fit sections that connect together securely ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed specifically for PSA modern graded slabs. This stand has been developed and tested for the PSA modern slab format. Compatibility with slabs from other grading companies (BGS, CGC, SGC or others) has not been tested and cannot be confirmed. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG — a tough, impact-resistant material that handles knocks and temperature swings well. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Display stand only — PSA graded slabs and cards not included. Items shown for illustration purposes only. This stand is confirmed for PSA modern slabs only. No compatibility with BGS, CGC, SGC or other grading company slab formats has been tested. The stand arrives as press-fit modular parts. Simply press the sections together for a secure fit. If the fit is not snug enough, a small amount of superglue is recommended to secure the join. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

2X2 ONE-TOUCH MAGNETIC CARD HOLDER DISPLAY STAND A modular 2x2 display stand designed to hold four Ultra Pro One-Touch or VaultX Magnetic Card Holders in a clean, upright grid arrangement. Built specifically for 35pt cardholders, it lets collectors showcase protected cards with a stable, space-efficient footprint. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - 4 x magnetic card holders in a 2x2 grid arrangement - Compatible holders: Ultra Pro One-Touch 35pt, VaultX Magnetic Card Holder 35pt ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Modular multi-part construction with press-fit assembly - Stable, upright grid layout holds four holders securely - Compact footprint suited to shelves, desks and display cabinets ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed and tested for 35pt magnetic card holders only. - Ultra Pro One-Touch Magnetic Card Holder (35pt) - VaultX Magnetic Card Holder (35pt) Compatibility with other cardholder thicknesses (55pt, 75pt, 130pt etc.) has not been tested. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. The material is tough and impact-resistant, handling knocks and normal indoor use well. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ASSEMBLY The stand arrives as separate printed parts and assembles by press-fit — no tools needed. If the fit is not snug straight away, a small amount of superglue at the joints will give a permanent, rigid hold. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Display stand only — card holders and cards not included. Items shown for illustration purposes only. This stand is designed for 35pt cardholders only. Compatibility with other thicknesses has not been tested — please check your holder's point rating before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

GRADED SLAB DISPLAY STAND FOR TCG STORE & CONVENTION A purpose-built display stand for graded trading card slabs, designed to hold your cards at an angle so potential buyers get the best view of their next purchase. The open-top slot lets you lift slabs in and out with ease — ideal for a convention booth, TCG store counter, or a low-profile display cabinet at home. Available in three angle variants — Low Angle, Mid Angle and High Angle — select your preferred option at purchase. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED / FEATURES - 1 x angled slab slot — holds one standard graded card slab upright at a display angle - Open-top slot design — lift the slab in and out without unfastening anything - Three angle variants available: Low Angle, Mid Angle, High Angle - Designed for sale displays, convention booths, TCG store counters and home cabinets ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x graded slab display stand (angle variant selected at purchase) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit standard graded card slabs from the following grading companies: - PSA graded slabs - CGC graded slabs - Beckett (BGS) graded slabs All standard graded slabs should fit. If you are unsure, please check your slab dimensions against the photos before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. Tough and impact-resistant — handles the knocks of a busy convention booth or store counter without issue. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Stand only — graded slabs and trading cards not included. Items shown for illustration purposes only. Fitment covers standard graded slabs (PSA, CGC and BGS). Non-standard or oversized slab formats may not seat correctly — check dimensions against the photos if in doubt. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

POKÉMON TCG BOOSTER BUNDLE DISPLAY STAND This display stand is designed to showcase your Pokémon TCG Booster Bundles, keeping your sealed collection looking its best on a shelf or desk. Choose between the 1-bundle or 2-bundle variant to suit your collection size. WHAT'S ORGANISED - 1-bundle variant: holds 1 Pokémon TCG Booster Bundle upright on display - 2-bundle variant: holds 2 Pokémon TCG Booster Bundles side by side on display ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit Pokémon TCG Booster Bundles. The stand works with Booster Bundles from the Pokémon TCG range generally — the images show bundles from an illustrative set as an example. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. PETG is a tough, impact-resistant material that handles everyday knocks well and maintains its shape on a display shelf. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Display stand only — Pokémon TCG Booster Bundles not included. Items shown for illustration purposes only. Select the 1-bundle or 2-bundle variant at the time of purchase. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

GRADED SLAB DISPLAY STAND FOR PSA / BECKETT / CGC MODERN SLABS Show off your graded cards with this purpose-built display stand, designed to hold modern slabs from PSA, Beckett (BGS) and CGC. The stand features a precision slot sized at 86mm wide by 8mm deep, matching the dimensions of modern graded slabs from the three major grading companies. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - 1 x graded slab (PSA, Beckett BGS or CGC modern format) - Slab slot: 86mm wide x 8mm deep ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Confirmed compatible slabs: - PSA Graded Slab (modern) - Beckett (BGS) Graded Slab (modern) - CGC Graded Slab (modern) The slot dimensions are 86mm wide by 8mm deep. Most modern PSA, BGS and CGC slabs are designed to this standard. Slabs from other grading companies may differ — check your slab dimensions against the figures above before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG. PETG is a tough, impact-resistant material that handles everyday handling and display use well, with a clean matt finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Display stand only — graded slabs not included. Items shown for illustration purposes only. This is a two-piece press-fit assembly. Press the two pieces firmly together to assemble — a tight fit is normal and some force may be needed. The 86mm x 8mm slot is sized for modern PSA, BGS and CGC slabs. Slabs from other grading companies are not confirmed compatible — check your slab dimensions before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

Top Loader Card Display Stand – Modular, Multi-Row A modular display stand designed to hold standard top loader card sleeves upright in a neat, organised arrangement. The stand is built in multiple pieces that connect together, allowing you to expand the display horizontally or vertically simply by printing additional sections — no glue required. Designed to fit standard top loader card sleeves with a snug fit. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Modular design — connect multiple units to build taller or wider displays - Snug fit for standard top loader card sleeves - Multi-row, multi-column configuration possible - No glue required — press-fit assembly - Multi-piece construction ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit standard top loader card sleeves. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Item only. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D