Car Cup Holder Inserts & Centre Console Trays

OVERSIZED BOTTLE CUP HOLDER INSERT FOR HONDA CR-V 2017–2022 CENTRE CONSOLE This insert fits into the centre console cup holder well of the Honda CR-V (2017–2022) and expands the opening to accommodate oversized water bottles that are too wide for the standard recess. A simple press-in addition that makes the console more practical for everyday use. Designed for drivers who carry large-format water bottles and find the factory cup holder too narrow to hold them securely. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x cup holder insert ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Oversized opening to accept wide-bodied water bottles - Octagonal profile with external locating tabs to sit securely in the CR-V console well - Press-fit installation — no tools, adhesive or modification required ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Honda CR-V (2017–2022) — centre console cup holder well Please verify your CR-V's console well dimensions against the photos before ordering if you are unsure of your build year. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG. Tough and impact-resistant, handling everyday use and temperature swings in the vehicle cabin without issue. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only — no other items included. Items shown for illustration purposes only. This insert is designed to fit the 2017–2022 Honda CR-V centre console. Fit on other CR-V generations or trim variants with a different console layout is not confirmed — please check the photos against your own console before purchasing. No internal bottle diameter or height dimension is stated by the designer. Buyers with an unusually tall or wide bottle should verify against the photos prior to ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

TWO-CUP ORGANISER INSERT FOR CITROËN C4 CACTUS MK1 The standard C4 Cactus cup holder leaves little room for the drinks most drivers actually carry. This upgrade slots straight into the existing recess and expands it to hold two cups at once, with a centre slit for keeping a car parking ticket to hand. The aperture is larger than the original, accepting standard coffee shop cups as well as carbonated and energy drink cans — the kinds of drinks the factory holder was never sized for. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Two cup positions replacing the standard single holder - Centre slit for storing a car parking ticket - Increased aperture to accept standard coffee shop cups and drink cans - Press-fit design sits snugly into the existing cup holder recess with no rocking or movement ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x double cup holder upgrade insert ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Citroën C4 Cactus Mk1 (2014-2017) Please check the photos carefully to confirm fitment with your vehicle before ordering. This insert was designed for the Mk1 C4 Cactus 2014-2017 editions and may not fit other model years or variants. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG — a tough, impact-resistant material that handles the temperature swings and everyday knocks of a car interior. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only — no other parts included. Items shown for illustration purposes only. Compatibility is confirmed for the Citroën C4 Cactus Mk1 2014-2017 editions only. Please verify against the photos before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

DRINKS HOLDER ORGANISER FOR RENAULT MEGANE CENTRE CONSOLE A custom insert designed to sit in front of the gear stick, making the Megane's built-in cup holder recess genuinely usable. Holds bottles, cans and travel mugs securely and routes a phone charger cable cleanly through the tray. WHAT'S ORGANISED - 2 x cup holder wells for bottles, cans or travel mugs - Rear clearance space to avoid obstructing USB or SD card ports (model-dependent — check your car's layout before ordering) - Cable pass-through hole to route a phone charger cable from the tray COMPATIBILITY Designed to fit: Renault Megane (generation to be confirmed — see Please Note below) MATERIAL & FINISH 3D printed in the UK from PETG. Matt textured finish. Tough and impact-resistant, handles the knocks and temperature swings of everyday in-car use. PLEASE NOTE Insert only — no drinks, cables or accessories included. Items shown for illustration purposes only. This insert is designed to fit the Renault Megane. The exact generation and year range it suits has not yet been confirmed by the seller — please check the product photos against your own car's centre console before ordering. USB and SD card clearance at the rear is also model-dependent and may vary between Megane variants. If you are unsure whether this insert suits your specific Megane, please message before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

Centre Console Storage Organiser for 2026 Kia Sportage with Charger Port Cutout A custom-designed storage organiser insert for the centre console of the 2026 Kia Sportage. Designed to fit models fitted with the lighter/charger port, this insert makes use of the centre console space to keep everyday items tidy and within reach. Supplied as a single-piece insert. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Designed to fit the centre console of the 2026 Kia Sportage - Includes cutout to accommodate the lighter/charger port - Organises the centre console storage area - Custom-designed insert form factor ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY - 2026 Kia Sportage (lighter/charger port variant) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG with a matt finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

Console Organiser Tray for Subaru Forester 2014–2023 A custom-fit console organiser tray designed to fit the centre console of the Subaru Forester (2014–2023). The tray provides three large, deep compartments and one small shallow compartment, making it ideal for keeping everyday items — such as a work badge, microfibre cloth or lip balm — neatly in place and within easy reach. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED / FEATURES - Three large, deep compartments for everyday carry items - One small, shallow compartment suited to slim items such as lip balm - Lip detail designed to locate into the ledge of the Forester centre console - One-piece design ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY - Designed to fit: Subaru Forester 2014–2023 Fitment was tested by the original designer on 2014 and 2023 Forester models; years in between are anticipated to be compatible but have not been independently verified. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG with a matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Tray only. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

Centre Armrest Storage Tray Insert for Kia Ceed / ProCeed (CD) A storage tray insert designed to sit inside the centre armrest compartment of the Kia Ceed (CD) and Kia ProCeed (CD), model year 2018 onwards. The insert organises the armrest storage area into defined sections, keeping everyday items tidy and easy to reach. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Designed to fit inside the centre armrest storage compartment - Multi-compartment layout to separate and organise small items - Covers Kia Ceed (CD) and ProCeed (CD) platform from 2018 onwards - Made in the UK from PETG ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY - Kia Ceed (CD) – 2018 onwards - Kia ProCeed (CD) – 2018 onwards ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG. Available in black. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black only.

Centre Console Storage Tray for Subaru Forester (2025–2026) A purpose-designed storage tray for the centre console of the 6th generation Subaru Forester (2025–2026). The 6th gen console is shaped differently to the 5th gen, and this tray has been designed specifically to fit that updated console. It organises everyday essentials — cards, coins, cables, a pen and more — keeping your centre console tidy and clutter-free. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - Large general storage area for sunglasses, small items and everyday essentials - 2x cord slots to keep phone charger cables wound and untangled - Card slot holding up to 10 cards (e.g. parking passes, swipe cards) at a depth that allows easy retrieval - Dedicated slot sized for a slim card holder or wallet alongside the cards - 3x coin holders, each holding approximately 10 coins depending on denomination - Pen slot - Lip balm slot ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit: Subaru Forester 6th Generation (2025–2026) Note: this tray is designed specifically for the 6th gen (2025–2026) console shape and is not intended for the 5th generation Forester. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG. Available in black. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Tray only. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black only.

This is a bespoke made to order listing, created for a specific customer. Please do not purchase unless this order has been agreed with us directly by email. A twin cup holder insert for the Skoda Kodiaq centre console, sized to take two 40oz Stanley cups. The rear socket sits raised above the front so the two lids and handles clear each other. Printed in black PETG at 30% infill. PETG is chosen for car interiors as it holds up far better than standard PLA in a hot cabin. Approximate size: 200 x 125 x 55mm Please read before ordering This item is printed from a 3D model file supplied by the customer. We have not designed, measured or modified it, and the customer holds their own copy of the file. Our role here is print and ship only. We are responsible for print quality, so if the part arrives damaged, warped or with a print defect we will replace it. We cannot take responsibility for whether the part fits your vehicle, holds your cups securely or performs as intended, as all of that is determined by the supplied design rather than by us. If you would like us to design a part from scratch and take responsibility for the fit, we offer that as a separate design service. Just get in touch and we will quote for it. Made to order and dispatched within 3 working days by Royal Mail Tracked.

AIR VENT CUP HOLDER FOR CITROEN JUMPER & FIAT DUCATO A practical dashboard cup holder designed to fit into the vehicle’s air vent. It keeps a suitable drink container within easy reach while travelling and features a strong, lightweight design. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Fits directly into the air vent - Helps keep drinks secure and accessible - Strong and durable PETG construction - Ventilated holder design - Easy to fit with no drilling required - Black finish complements most vehicle interiors ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed for: - Citroen Jumper - Fiat Ducato Please compare your air vent carefully with the installation photo before ordering, as vent designs can vary between model years and vehicle specifications. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made from strong, durable PETG with a black finish. Fine surface lines and minor cosmetic variations are normal characteristics of this type of product. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Cup holder only — drink container and vehicle are not included. Items shown are for illustration purposes only. Ensure the holder is fitted securely before use. Use only with suitably sized containers and do not allow it to obstruct vehicle controls or your view while driving. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black only.

Make the most of your Skoda Enyaq or Elroq's centre console with this custom-fit insert. Designed to drop neatly into the front console tray, it adds a dedicated cup holder on one side and a handy storage compartment on the other — ideal for coins, keys, cards, or your parking token. WHAT'S ORGANISED - Circular cup holder for drinks, keys, or loose change- Rectangular storage tray for cards, coins, or parking tokens- Single-piece design for a snug, drop-in fit — no trimming or modification needed- Lifts out easily for cleaning ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Skoda Enyaq and Skoda ElroqLeft-hand drive (LHD) vehicles only ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Durable PETG construction. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only — vehicle and console tray not included. Designed for LHD vehicles only; not compatible with right-hand drive models. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in Black only.

Finally, a cup holder that actually fits a proper mug. This custom 3D printed insert drops into the Skoda Octavia MK3 centre console cup holders and accommodates two standard mugs — perfect for grabbing a brew before the morning commute. No modifications needed — simply place the insert into the existing cup holders and you’re good to go. Printed in-house by HSK 3D using black PETG for heat resistance and durability, so it won’t warp with hot drinks.

Custom 3D printed cup and water bottle holder insert designed specifically for the Skoda Kodiaq 1st gen (2017–2024). Transforms the central cup holder area into a more versatile storage space with a dedicated spot for a larger water bottle plus extra trays for small items like coins, keys, or sweets. Simply drops straight into the existing cup holder — no tools, no modification, no adhesive needed. A practical upgrade that makes the interior feel more organised and purpose-built. Available in a range of colours — choose from the dropdown or message us if you need something specific. Printed in-house by HSK 3D using PETG for strength and heat resistance.

BMW E46 Rear 2-Cup Holder Insert — Custom 3D Printed | HSK 3D Tired of having nowhere to put drinks in the back of your E46? This custom-designed rear cup holder insert slots perfectly into the rear centre console storage compartment, giving your passengers two properly sized cup holders. What You Get: ∙ 1x 3D printed rear cup holder insert ∙ Designed specifically for the BMW E46 3 Series (saloon, touring, coupe, convertible — 1998–2006) ∙ Holds two standard-sized drinks cans securely ∙ Snug drop-in fit — no modifications, no adhesive, no drilling Why HSK 3D? ∙ Designed and printed in the UK ∙ High-quality 3D print with clean finish ∙ Precision modelled for an exact fit ∙ Lightweight yet durable Fitment: BMW 3 Series E46 (1998–2006) — fits the rear centre console storage cubby. Please check your rear console matches the photos before purchasing. Shipping: Fast UK dispatch via tracked delivery. Items are printed to order — please allow 1–3 working days for production.

BMW E34 5 Series Centre Console Cup Holder Insert – 3D Printed | 1988–1996 BMW never fitted the E34 with a proper cup holder, and anyone who's driven one knows the struggle. This 3D printed insert drops straight into the centre console tray, giving you two cup holders and a handy coin/small item slot — all without any modification to your car. Features: Two cup holders sized for standard drinks, cans, and bottles Built-in coin/small item tray at the front Drops straight into the existing centre console storage area — no drilling, no clips, no fuss Clean black finish that matches the E34 interior Designed, printed, and shipped from the UK What's included: 1x Centre Console Cup Holder Insert with Coin Tray (Black) Fitment: BMW 5 Series E34 (Saloon & Touring) 518i, 520i, 525i, 525ix, 525td, 525tds, 530i, 535i, 540i, M5 Years: 1988 – 1996

BMW E39 5 Series Centre Console Cup Holder Insert – 3D Printed | 1997–2003 If you've owned an E39 you'll know BMW's idea of a cup holder left a lot to be desired. This 3D printed dual cup holder insert slides directly into the centre console storage compartment, giving you two properly sized drink holders exactly where you need them. Why choose this? Slides straight into the existing centre console opening — no modifications needed Holds two standard-size cups, bottles, or cans securely A fraction of the cost of aftermarket alternatives Printed in durable, high-quality material in the UK Clean, OEM-look black finish that blends with the interior What's included: 1x Centre Console Cup Holder Insert (Black) Fitment: BMW 5 Series E39 (Saloon & Touring) 520i, 523i, 525i, 525d, 528i, 530i, 530d, 535i, 540i, M5 Years: 1997 – 2003

BMW E90 E91 E92 E93 3 Series Centre Console Cup Holder Insert – 3D Printed Replacement Tired of your drinks sliding around or your original cup holder cracking and breaking? This 3D printed cup holder insert is designed as a direct drop-in replacement for the BMW 3 Series centre console (E90 Saloon, E91 Touring, E92 Coupé, E93 Convertible – 2005 to 2013 models). Why choose this over the OEM part? Fraction of the cost of the genuine BMW replacement Snug, rattle-free fit — designed to slot straight into the existing console opening Holds two standard-size drinks securely Printed in durable, high-quality material right here in the UK Lightweight yet strong What's included: 1x Centre Console Cup Holder Insert (Black) Fitment: BMW 3 Series E90 (Saloon) BMW 3 Series E91 (Touring / Estate) BMW 3 Series E92 (Coupé) BMW 3 Series E93 (Convertible) Years: 2005 – 2013 About HSK 3D: All our products are designed and 3D printed in the UK. We take pride in producing practical, high-quality accessories at affordable prices. If you have any questions or need a custom colour, just drop us a message. Dispatch & Shipping: Dispatched within 1–2 working days Royal Mail tracked delivery

Make the most of your Skoda Enyaq or Elroq's centre console space with this practical 3D printed insert. Designed to drop neatly into the front centre console tray, it gives you a dedicated cup holder on one side and a handy storage compartment on the other — perfect for coins, keys, cards, or your parking token. What You'll Receive: One 3D printed centre console insert featuring a circular cup holder and a rectangular storage tray, designed for a snug drop-in fit with no modifications needed For RHD UK vehicles, message directly if you need LHD

Upgrade your BMW E46's centre console with this sturdy 3D printed cup holder insert. Designed to slot into the centre console ashtray area, this insert provides reliable drink storage without the frustration of the notoriously fragile OEM cup holders. What You'll Receive: One 3D printed cup holder insert, designed to fit the BMW E46 3 Series centre console. Features two cup/bottle holders and an additional smaller slot — perfect for keeping drinks, air fresheners, or small items secure while driving. Compatibility: BMW 3 Series E46 (1998–2006) Fits the centre console ashtray/storage area Please check your console dimensions before ordering to ensure a proper fit Details: 3D printed from durable PLA filament Solid, rigid construction — no more wobbly, flimsy holders Snug drop-in fit, no modifications or tools required Available in black Designed and printed in the UK by HSK 3D