Automotive Accessories

OVERSIZED BOTTLE CUP HOLDER INSERT FOR HONDA CR-V 2017–2022 CENTRE CONSOLE This insert fits into the centre console cup holder well of the Honda CR-V (2017–2022) and expands the opening to accommodate oversized water bottles that are too wide for the standard recess. A simple press-in addition that makes the console more practical for everyday use. Designed for drivers who carry large-format water bottles and find the factory cup holder too narrow to hold them securely. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x cup holder insert ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Oversized opening to accept wide-bodied water bottles - Octagonal profile with external locating tabs to sit securely in the CR-V console well - Press-fit installation — no tools, adhesive or modification required ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Honda CR-V (2017–2022) — centre console cup holder well Please verify your CR-V's console well dimensions against the photos before ordering if you are unsure of your build year. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG. Tough and impact-resistant, handling everyday use and temperature swings in the vehicle cabin without issue. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only — no other items included. Items shown for illustration purposes only. This insert is designed to fit the 2017–2022 Honda CR-V centre console. Fit on other CR-V generations or trim variants with a different console layout is not confirmed — please check the photos against your own console before purchasing. No internal bottle diameter or height dimension is stated by the designer. Buyers with an unusually tall or wide bottle should verify against the photos prior to ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

TWO-CUP ORGANISER INSERT FOR CITROËN C4 CACTUS MK1 The standard C4 Cactus cup holder leaves little room for the drinks most drivers actually carry. This upgrade slots straight into the existing recess and expands it to hold two cups at once, with a centre slit for keeping a car parking ticket to hand. The aperture is larger than the original, accepting standard coffee shop cups as well as carbonated and energy drink cans — the kinds of drinks the factory holder was never sized for. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Two cup positions replacing the standard single holder - Centre slit for storing a car parking ticket - Increased aperture to accept standard coffee shop cups and drink cans - Press-fit design sits snugly into the existing cup holder recess with no rocking or movement ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x double cup holder upgrade insert ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Citroën C4 Cactus Mk1 (2014-2017) Please check the photos carefully to confirm fitment with your vehicle before ordering. This insert was designed for the Mk1 C4 Cactus 2014-2017 editions and may not fit other model years or variants. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG — a tough, impact-resistant material that handles the temperature swings and everyday knocks of a car interior. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only — no other parts included. Items shown for illustration purposes only. Compatibility is confirmed for the Citroën C4 Cactus Mk1 2014-2017 editions only. Please verify against the photos before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

DRINKS HOLDER ORGANISER FOR RENAULT MEGANE CENTRE CONSOLE A custom insert designed to sit in front of the gear stick, making the Megane's built-in cup holder recess genuinely usable. Holds bottles, cans and travel mugs securely and routes a phone charger cable cleanly through the tray. WHAT'S ORGANISED - 2 x cup holder wells for bottles, cans or travel mugs - Rear clearance space to avoid obstructing USB or SD card ports (model-dependent — check your car's layout before ordering) - Cable pass-through hole to route a phone charger cable from the tray COMPATIBILITY Designed to fit: Renault Megane (generation to be confirmed — see Please Note below) MATERIAL & FINISH 3D printed in the UK from PETG. Matt textured finish. Tough and impact-resistant, handles the knocks and temperature swings of everyday in-car use. PLEASE NOTE Insert only — no drinks, cables or accessories included. Items shown for illustration purposes only. This insert is designed to fit the Renault Megane. The exact generation and year range it suits has not yet been confirmed by the seller — please check the product photos against your own car's centre console before ordering. USB and SD card clearance at the rear is also model-dependent and may vary between Megane variants. If you are unsure whether this insert suits your specific Megane, please message before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

SUN VISOR REPLACEMENT CLIP FOR FIAT GROUP VEHICLES This is a replacement sun visor retaining clip for a range of Fiat group vehicles. The original clip is a common failure point and this part is designed to match the profile of the broken or missing original, restoring the sun visor to its correct position. Suitable for drivers who have lost or broken the original plastic clip and want a straightforward replacement without sourcing an expensive OEM spare. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Replacement clip designed to match OEM profile - Matches OEM-equivalent references 713812631 and 735362747 - Press-fit installation to the original sun visor mounting point ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED - 1 x sun visor replacement clip ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Confirmed fitment: - Lancia Y (2007) - Fiat Fiorino (2012) Designed to match OEM-equivalent part numbers 713812631 and 735362747, which are listed across multiple aftermarket suppliers as compatible with Fiat 500, Bravo, Doblo, Fiorino, Marea, Palio and Punto. If your vehicle uses either of these OEM reference numbers, this clip is designed to the same profile. Please check the photos against your original clip before ordering to confirm fitment. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG — a tough, impact-resistant material that handles temperature swings and everyday knocks well. Matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE This listing is for the replacement clip only — no other parts are included. Items shown for illustration purposes only. While this clip is designed to the profile of OEM references 713812631 and 735362747, fitment across all Fiat group models and years has not been individually verified. Please compare the photos carefully with your original clip before purchasing. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

Armrest Storage Tray for the KIA Sportage (2017) This tray fits into the armrest area of the KIA Sportage 2017, creating a double-height compartment within the central console. It makes use of the existing armrest space to add a second level of organised storage, keeping everyday items tidily separated and within easy reach. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Designed to fit the KIA Sportage 2017 central console armrest recess - Creates a double-height storage compartment - Adds a second tier of organisation within the existing console space - Keeps small items separated and accessible ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit: KIA Sportage (2017) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG with a matt finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Item only. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

Centre Console Storage Organiser for 2026 Kia Sportage with Charger Port Cutout A custom-designed storage organiser insert for the centre console of the 2026 Kia Sportage. Designed to fit models fitted with the lighter/charger port, this insert makes use of the centre console space to keep everyday items tidy and within reach. Supplied as a single-piece insert. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Designed to fit the centre console of the 2026 Kia Sportage - Includes cutout to accommodate the lighter/charger port - Organises the centre console storage area - Custom-designed insert form factor ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY - 2026 Kia Sportage (lighter/charger port variant) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG with a matt finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

Console Organiser Tray for Subaru Forester 2014–2023 A custom-fit console organiser tray designed to fit the centre console of the Subaru Forester (2014–2023). The tray provides three large, deep compartments and one small shallow compartment, making it ideal for keeping everyday items — such as a work badge, microfibre cloth or lip balm — neatly in place and within easy reach. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED / FEATURES - Three large, deep compartments for everyday carry items - One small, shallow compartment suited to slim items such as lip balm - Lip detail designed to locate into the ledge of the Forester centre console - One-piece design ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY - Designed to fit: Subaru Forester 2014–2023 Fitment was tested by the original designer on 2014 and 2023 Forester models; years in between are anticipated to be compatible but have not been independently verified. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH 3D printed in the UK from PETG with a matt textured finish. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Tray only. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D

Centre Armrest Storage Tray Insert for Kia Ceed / ProCeed (CD) A storage tray insert designed to sit inside the centre armrest compartment of the Kia Ceed (CD) and Kia ProCeed (CD), model year 2018 onwards. The insert organises the armrest storage area into defined sections, keeping everyday items tidy and easy to reach. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - Designed to fit inside the centre armrest storage compartment - Multi-compartment layout to separate and organise small items - Covers Kia Ceed (CD) and ProCeed (CD) platform from 2018 onwards - Made in the UK from PETG ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY - Kia Ceed (CD) – 2018 onwards - Kia ProCeed (CD) – 2018 onwards ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG. Available in black. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Insert only. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black only.

Centre Console Storage Tray for Subaru Forester (2025–2026) A purpose-designed storage tray for the centre console of the 6th generation Subaru Forester (2025–2026). The 6th gen console is shaped differently to the 5th gen, and this tray has been designed specifically to fit that updated console. It organises everyday essentials — cards, coins, cables, a pen and more — keeping your centre console tidy and clutter-free. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT'S ORGANISED - Large general storage area for sunglasses, small items and everyday essentials - 2x cord slots to keep phone charger cables wound and untangled - Card slot holding up to 10 cards (e.g. parking passes, swipe cards) at a depth that allows easy retrieval - Dedicated slot sized for a slim card holder or wallet alongside the cards - 3x coin holders, each holding approximately 10 coins depending on denomination - Pen slot - Lip balm slot ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Designed to fit: Subaru Forester 6th Generation (2025–2026) Note: this tray is designed specifically for the 6th gen (2025–2026) console shape and is not intended for the 5th generation Forester. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG. Available in black. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Tray only. Items shown for illustration purposes only. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D Available in black only.