1/2" DRIVE 14-FLUTE CUP-STYLE OIL FILTER WRENCH — MULTIPLE SIZES A cup-style oil filter wrench with a 1/2" square drive and a 14-flute inner profile, designed to grip the end cap of common spin-on and cartridge oil filters. Available in eight sizes to cover a wide range of vehicles — from compact cars through to heavy-duty trucks and SUVs. The knurled outer ring lets you start or finish by hand, and the tapered load cone keeps force centred on the drive for a clean pull. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES - 1/2" square drive (female) in the base — fits standard 1/2" ratchets and breaker bars - 14-flute inner profile grips OEM and aftermarket filter end caps - Tapered load cone centres force on the drive - Knurled outer ring for hand-tightening or loosening before using a ratchet - Thick walls and generous fillets for strength - Eight sizes available — order the size that matches your filter ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMPATIBILITY Choose the size equal to or 0.5–1.0 mm larger than your filter cap measurement (measured across the flats with calipers). If you are between sizes, choose the larger one. 63.5 mm — Honda Civic / Accord spin-on filters (select models); some older Toyota Corolla 64 mm — Toyota, Lexus, Scion (most 4-cylinder and V6 engines with cartridge filters); some BMW motorcycles 65 mm — GM vehicles — Chevrolet Cruze, Equinox (PF-xxx series filters) 67 mm — Nissan / Suzuki compact car filters; some Mitsubishi filters 68 mm — Ford EcoBoost 1.0L / 1.5L filters; some Hyundai / Kia models 73 mm — Subaru Impreza / Crosstrek (2020+); Volkswagen Golf TSI filters 74 mm — BMW 1-, 3-, 5-Series (N20/N26 engines); Audi A4; VW Passat and many European cars 76 mm — Heavy-duty trucks and SUVs — Ram 1500 Diesel; larger Ford / GM filters This list covers common applications. Always confirm your filter uses 14 flutes and measure your filter cap before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MATERIAL & FINISH Made in the UK from PETG. Matt textured finish. PETG is tough and impact-resistant with good oil resistance — well suited to workshop use. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PLEASE NOTE Wrench only — 1/2" ratchet not included. Items shown for illustration purposes only. This wrench is designed for 14-flute oil filters. Confirm your filter uses 14 flutes before ordering — some manufacturers use a different flute count and this tool will not grip them correctly. Size selection is required at order. Measure across the flats of your filter cap with calipers and select the size equal to or 0.5–1.0 mm larger than your measurement. Example: a 73.2 mm cap — choose the 74 mm wrench. The vehicle and filter fitment list is based on common applications. Filter specifications vary by model year and engine variant. Always verify your specific filter size before ordering. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Dispatched from the UK | Fast Posting | HSK 3D
